|
Home Page Profile Products Marketing
Strength R
& D Support Feedback Contact
Us |
|
|
|
 |
Low Density Polyethylene for Sheathing and Jacketing of Jelly Filled Telecommunication Cables. |
| BLS
Polymers Ltd. introduces another sophisticated compound for
sheathing & jacketing of Jelly Filled Telephone Cables
Grade BLS 2222 . This compound meets the stringent quality
requirement for Jelly Filled Telephone Cables. |
| TYPICAL
PROPERTIES |
PROPERTY |
UNIT
|
TEST
METHOD |
TYPICAL
VALUE |
Density |
gm / cc |
ASTM D 1505 |
< 926 |
Melt Flow Index
(1900C,Load of 2.16 Kg) |
gm / 10 min |
ASTMD-1238 |
Max 1.0 |
Tensile Strength |
Kg / mm2 |
ASTMD 638 |
Min 100 |
Elongation at Break |
% |
--do-- |
Min 300 |
Carbon Black Content |
% |
ASTMD 1603 |
2.5+ 0.5% |
Carbon Back Dispersion |
- |
BS-2782 Method 823 A&B |
- |
(a) Rating
(b) Uniformity of appearance |
- |
4
Better than ‘A’ of figure 1 |
|
|
|
|
O.I.T. |
Minutes |
TEC SPEC
GR/CUG-01/03 AUG2003 |
Min. 30 |
ESCR |
---- |
ASTM D-1693
Condition ‘B’ |
No Cracks |
Moisture Content |
% |
ASTM D-817 |
0.02% Max |
Shrinkage |
% |
TEC SPEC
GR/CUG-01/03 AUG2003 |
5% |
Di-electric Strength
(KV RMS Per MM) |
KV |
ASTMD 149 |
20 KV |
|
The
information contained in this leaflet is to the best of our
knowledge true and accurate, but any recommendation or suggestion
which may be made is without guarantee, since the condition
of use are beyond our control. We expressly disclaim liability
incurred in connection with the use of these data for suggestions. |
|
|
|
|
|